You’re getting pretty good at the basics of scoring and breaking stained glass, but you’ve run into some problems with difficult cuts that seem impossible. There are techniques that will make difficult cuts in stained glass seem like cutting butter.
Scoring disturbs the molecules in stained glass, so you want to separate it immediately after scoring.
– Narrow Strips: A straight strip that is scored less than an inch away from the edge of the stained glass, it will be difficult to pull it apart with your hands. Use running pliers and align the bump in the pliers head on the score line and squeeze. This causes the score to run and break apart
– Straight Lines: When cutting straight lines on larger pieces, you can line up the score line along a table edge. Hold one side firmly on the table while using your other hand to pull down and away, snapping the pieces of the stained glass apart.
– Small Squares: If you have several squares of stained glass to cut, use a straight edge to measure the width, run your score line, then break the strip away using running pliers, breaking pliers, or your hands.
After you have your stained glass strip, measure and score across the strip the same amount as the width of the strip. You can quickly line up each score line on the edge of your Norton board and, one at a time, push down and snap off the small square stained glass pieces.
– Curves: If you are scoring clear stained glass, you can lay your glass on top of your pattern, smooth side up. Cut your stained glass down to just a little bigger than the piece which your are cutting – about 1/2 inch extra all the way around the piece.
Score all the way around the piece, just inside the black line of your pattern. Next, score several diverging lines from the pattern line to the edge of the stained glass. Break away pieces a little at a time. Never try to break away too large of a piece of stained glass because it will shatter.
– Circles: You can cut a nearly perfect circle out of stained glass by using a similar process as for curves. Score all the way around the circle, just inside the black line and then score several lines from the circle to the outside edge of the glass. Start breaking away small sections of the stained glass
– Concave Curves – Concave curves are difficult to break out of stained glass, especially if they are deep. Again, you will start by scoring just inside the black line of the pattern on the smooth side of the stained glass. From that inside line, gradually add several more similar cuts until you are on the outer edge of the highest ends of the curve. Use the ball end of a pencil cutter to gently tap runs into the scores; then break away one piece at a time from the outside, in. Sometimes it helps to rock each end of the score back and forth before pulling apart the curved stained glass pieces.
– V-cuts: V-cuts are next to impossible unless you happen to have a special band saw for cutting stained glass. Otherwise, a v-cut like you would have in a heart shape should be redesigned so it has a softer curve instead of a point.
Don’t be discouraged if once in a while the natural tendency is for the stained glass to just go ahead and break straight across.
Elina Prestley writes for Uniformhaven.com which offers cherokee scrubs, landau scrub jackets and lab coats as well as a lot of other items.
You recently visited an exhibit at an art gallery that showed numerous stained glass table tops on display. After looking at some of these table tops, you decided that you would like to buy one for your home. However, before you run out and buy one, you should be aware that there are a number of things that you need to consider before making a purchase. This article will discuss some of the key considerations that should be taken into account when buying a stained glass table top.
One key consideration is the thickness of the table top. The thickness that is most appropriate for your needs will depend on what you plan to do with the table top. If you are using it as nothing more than a decorative piece, then you can probably get away with 1/4″ thick glass. However, if you’re going to be using it to support things that are placed on it, then you may be better off with 3/8″ or even thicker glass.
Once you have made a decision about the thickness of your stained glass table top, you need to decide how big you want it to be. You must keep in mind however, that stained glass table tops should not be any more than double the dimensions of the underlying base, in order to insure the stability of the table. Once again, this also depends to an extent on what you intend to use the table top for. In addition, you also need to consider the shape of the table top. While most of these table tops are round, some of them are made in rectangles, squares, ovals, and other shapes.
One of the more obvious considerations that you need to take into account is what you want your table top to look like. With stained glass table tops, the possibilities are virtually endless. Some of the more popular stained glass table tops feature floral patterns and motifs, along with pictures of birds and other nature themes. Such a table top might go along really well in your home office, alongside that new l shaped computer desk with hutch that you bought the other day. When shopping for a stained glass table top, it’s best to first decide on what design you would like and see if you can find a table top that matches that.
You also need to decide on how much money you can afford to spend on a glass table top. This is often the biggest determining factor when it comes to what type of table top you buy, if you end up buying one at all. You can get a really nice one for under $400, but the price normally goes up from there, depending on the unique qualities that you might desire.
Dimensions, shape, design, aesthetic appeal, usefulness, and cost are some of the items that you need to consider carefully before buying a stained glass table top. If you take the time to carefully consider each of these items, you have a much better chance of getting a quality stained glass table top that is best suited for your needs.
- Glass Safely Working
Schott Glass Technologies has developed a new contrast enhancement glass for spectacle lenses. The new material, called ACE, short for "Amethyst Contrast Enhancer ...
- Glass Panel Clips
C-GTW1 2" x 2" Wall mount clip for securing fixed panels in a shower enclosure application. May be attached to curb,ceiling or wall.
- Wissmach Glass Company
For more than 100 years the Paul Wissmach Glass Company Inc. in Paden City, W. Va., has been creating colorful, rolled sheet glass for use in stained glass
- Glass Glue Metal
- Oversized Glass Vases
Find details of oversized champagne glass vase with unique gifts, souvenirs and giveaways including Wedding Champagne Flutes in a Vase, Personalized Glass Photo Vase ...
